7.6. ioctl VIDIOC_DBG_G_REGISTER, VIDIOC_DBG_S_REGISTER¶
7.6.1. Name¶
VIDIOC_DBG_G_REGISTER - VIDIOC_DBG_S_REGISTER - Read or write hardware registers
7.6.2. Synopsis¶
-
int
ioctl
(int fd, VIDIOC_DBG_G_REGISTER, struct v4l2_dbg_register *argp)¶
-
int
ioctl
(int fd, VIDIOC_DBG_S_REGISTER, const struct v4l2_dbg_register *argp)¶
7.6.3. Arguments¶
fd
- File descriptor returned by open().
argp
- Pointer to struct
v4l2_dbg_register
.
7.6.4. Description¶
Note
This is an Experimental API Elements interface and may change in the future.
For driver debugging purposes these ioctls allow test applications to access hardware registers directly. Regular applications must not use them.
Since writing or even reading registers can jeopardize the system
security, its stability and damage the hardware, both ioctls require
superuser privileges. Additionally the Linux kernel must be compiled
with the CONFIG_VIDEO_ADV_DEBUG
option to enable these ioctls.
To write a register applications must initialize all fields of a struct
v4l2_dbg_register
except for size
and
call VIDIOC_DBG_S_REGISTER
with a pointer to this structure. The
match.type
and match.addr
or match.name
fields select a chip
on the TV card, the reg
field specifies a register number and the
val
field the value to be written into the register.
To read a register applications must initialize the match.type
,
match.addr
or match.name
and reg
fields, and call
VIDIOC_DBG_G_REGISTER
with a pointer to this structure. On success
the driver stores the register value in the val
field and the size
(in bytes) of the value in size
.
When match.type
is V4L2_CHIP_MATCH_BRIDGE
, match.addr
selects the nth non-sub-device chip on the TV card. The number zero
always selects the host chip, e. g. the chip connected to the PCI or USB
bus. You can find out which chips are present with the
ioctl VIDIOC_DBG_G_CHIP_INFO ioctl.
When match.type
is V4L2_CHIP_MATCH_SUBDEV
, match.addr
selects the nth sub-device.
These ioctls are optional, not all drivers may support them. However
when a driver supports these ioctls it must also support
ioctl VIDIOC_DBG_G_CHIP_INFO. Conversely
it may support VIDIOC_DBG_G_CHIP_INFO
but not these ioctls.
VIDIOC_DBG_G_REGISTER
and VIDIOC_DBG_S_REGISTER
were introduced
in Linux 2.6.21, but their API was changed to the one described here in
kernel 2.6.29.
We recommended the v4l2-dbg utility over calling these ioctls directly. It is available from the LinuxTV v4l-dvb repository; see https://linuxtv.org/repo/ for access instructions.
-
v4l2_dbg_match
¶
__u32 | type |
See Chip Match Types for a list of possible types. | |
union | (anonymous) | ||
__u32 | addr |
Match a chip by this number, interpreted according to the type
field. |
|
char | name[32] |
Match a chip by this name, interpreted according to the type
field. Currently unused. |
-
v4l2_dbg_register
¶
struct v4l2_dbg_match | match |
How to match the chip, see v4l2_dbg_match . |
__u32 | size |
The register size in bytes. |
__u64 | reg |
A register number. |
__u64 | val |
The value read from, or to be written into the register. |
V4L2_CHIP_MATCH_BRIDGE |
0 | Match the nth chip on the card, zero for the bridge chip. Does not match sub-devices. |
V4L2_CHIP_MATCH_SUBDEV |
4 | Match the nth sub-device. |
7.6.5. Return Value¶
On success 0 is returned, on error -1 and the errno
variable is set
appropriately. The generic error codes are described at the
Generic Error Codes chapter.
- EPERM
- Insufficient permissions. Root privileges are required to execute these ioctls.